為了響應這次顆粒系活動..
耗費了N個夜晚完成這幅馬賽克畫..
位置修改了3次(因為人臉沒有在中間),顏色至少修改5次..
真是耗費精力的大工程..(累..)
感謝老婆陪我一起製作囉..
Harry Potter.. :) (要遠遠看喔..請離電腦螢幕100cm..XD)
[img width=250]http://www.brickshelf.com/gallery/RMingTW/HarryPotter/00.jpg[/img]
先上外框..
[img width=380]http://www.brickshelf.com/gallery/RMingTW/HarryPotter/01.jpg[/img]
[img width=380]http://www.brickshelf.com/gallery/RMingTW/HarryPotter/02.jpg[/img]
再接著填色..
[img width=380]http://www.brickshelf.com/gallery/RMingTW/HarryPotter/03.jpg[/img]
[img width=380]http://www.brickshelf.com/gallery/RMingTW/HarryPotter/04.jpg[/img]
拉出頭髮有反光的地方..
[img width=420]http://www.brickshelf.com/gallery/RMingTW/HarryPotter/05.jpg[/img]
先填舊深灰..
[img width=420]http://www.brickshelf.com/gallery/RMingTW/HarryPotter/06.jpg[/img]
再填深藍灰..
[img width=420]http://www.brickshelf.com/gallery/RMingTW/HarryPotter/07.jpg[/img]
當顏色覺得怪怪的,先如下圖般覆蓋著兩層..
移往遠處看,覺得合適之後,再將積木替換..
[img width=450]http://www.brickshelf.com/gallery/RMingTW/HarryPotter/09.jpg[/img]
完成!
[img width=330]http://www.brickshelf.com/gallery/RMingTW/HarryPotter/12.jpg[/img]
無論哪個角度看,都很有立體感..這是樂高積木「凸點」的優點吧..
若用Tile(樂高平滑零件),或水彩,從側面看會有薄薄的反光與2D感..
但是樂高「豆」會產生一種明顯的立體感..
[img width=600]http://www.brickshelf.com/gallery/RMingTW/HarryPotter/10.jpg[/img]
哈利波特的照片..
![]()
一共殺了3盒顆粒..
[img width=400]http://www.brickshelf.com/gallery/RMingTW/HarryPotter/14.jpg[/img]
謝謝觀賞..
大家一起來創作喔! :)
[img width=230]http://www.brickshelf.com/gallery/RMingTW/HarryPotter/11.jpg[/img] |