rocklego大大，根據42056 - Porsche 911 GT3 RS - MODs and Improvements整理的7種方式，
我有跟著改的地方如下↓
1.Blakbirds Step-5-MOD (http://www.eurobrick...75#entry2575969):
Fixes the probably strongest issue, the way too much friction in the drive train preventing the whole model from working - fixes a mission critical issue
這部分我改後，但我還是不太了解差異在哪？
2.Attikas change-over-catches-fix (http://www.eurobrick...50#entry2579365):
Fixes the probably second strongest issue, the double engaging issue which blocks the whole drive train -
fixes a mission critical issue and makes gear switching quite 100% reliable
我也依影片方式將紅色撥桿轉向，但裝回底盤後卻更無法換檔，找不出原因為何，所以又改回來了，囧~
3.supertechnicmans fix for the infinite gear shifting issue (http://www.eurobrick...25#entry2577440):
This issue is not mission critical but annoying
這個方法我有試，只能讓1跟4檔位到定位，但2、3檔還是會偏~
4.Paul Boratkos fix for the wrong gear sequence (see Jim review in the first posting which explains the solution):
This issue is not mission critical but annoying. A sequential gearbox shoud change gears in 1 -> 2 --> 3 --> 4
這個部分我有依照1樓Lee0720開版大的圖片將左右兩組齒輪互換位置，裝馬達測試ok~
5.Didumos69' fix for the missing HOG (http://www.eurobrick...25#entry2581074):
the steering wheel inside the cabin is quite unreachable for a male-hand...
so this is not really mission critical but at least very annoying.
So this fix adds great value to playability and it is well braced and well integrated so it does not pollute the great look of the car
依此方式加裝HOG，真的不錯用~
6.Max supercars fix for the 4R problem (http://www.eurobrick...25#entry2578360):
This is not an issue at all but a very unrealistic implementation of a gearbox. This fix makes the whole gearbox way more realistic
這個改裝有點複雜，所以跳過沒試，囧~
7.Jetros MOD for easy unmounting/remounting the bodywork (http://www.eurobrick...3):
Not an issue but enhances the value of the model a lot because only without bodywork all the inner workings can be watched.
等我車體搞出來後，再來研究~
以上若有任何問題，敬請批評指教，謝謝！
|
發表於 2016-6-3 23:33:45
樓主
發表於 2016-6-5 08:48:52
