▼Double bus作品完成後,便忽想加做個車站來應景XD
Double bus work is completed, the station will suddenly want to be added to the occasion
▼巴士跟車站就像魚水一樣離不開@@
Bus and station with the same like a fish without water
▼準備發頭班車了!
Prepare the first bus of the
▼上車搭乘出發...
On the bus ride departure
▼首班上車幾乎滿座喔
First class almost sold out
▼另個角度來看看
Also take a look at angles
▼雙層巴士一般是坐後座比較不會頭暈,所以後面立馬一堆人XD
Sit back seat double-decker buses are generally less likely to dizziness, so a bunch of people Immediately behind
▼配菜跟主餐合拍後再來要進入主角的介紹了^^
Garnish in tune with the main meal and then to be introduced into the protagonist
▼這件巴士車輪是官方SET拔下來,其它都是用MOC零件組成
This is the official wheel of a bus SET pull down, the other component parts are used MOC
▼巴士頭車!
Bus front
▼雙層巴士的外型我有一點點給它Q板化,有些肥肥加上擬真XD
Overall I have a double-decker bus to give it a little Q board and for some fertilizer plus immersive
▼巴士常常有很鮮豔的塗裝,此作也大量使用高亮度零件互搭
Buses often have very vivid painting, this work also makes extensive use of high brightness lapped parts
▼拍完主角外觀,接著特寫巴士車體的可動部份,首先是行李艙^^
Protagonist finished appearance, and then close the movable part of the bus of the vehicle body, the first luggage compartment
▼前車門可以開喔(廢話XD)
Oh front door can be opened (nonsense!)
▼後門開啟...
Back door open
▼也有作引擎室^^
There is also room for the engine
▼特效全開XD
Full effects
▼Double bus作品無顆粒化之外,每個層板都作模組化可分離
Double bus works without granulation, the shelves are made each modular detachable
▼巴士開始作的時候,個人著重駕駛艙的部份,一定要很寫實!
Buses begin to make the time, individuals focus on the part of the cockpit, must be very realistic
▼側拍另一邊的配置(右方"密室"那間是小廁所^^")
The other side of the configuration of side shot(On the right is a small chamber that room toilet)
▼廁所跟車體走道配置為了空間出來,廁所門用斜面方式
Toilet aisle configuration for space with the body out of the toilet door with beveled way
▼現在的巴士駕駛艙越來越多科技儀表,只差能不能無人駕駛了@@"
The bus is now more and more technology cockpit instruments, differing only in the drone can
▼巴士駕駛座椅是很舒服的氣墊+人體工學喔= =+
Bus driver's seat is very comfortable cushion+Ergonomic!
▼特寫一下前艙樓梯附近的車內空間
Close-up look at the front cabin interior space near the stairs
▼滅火器是必備(上層客艙玻璃角落也有配安全逃生用車窗擊破器)
Fire extinguisher is a must(Glass corner of the upper deck are also equipped with a safe escape Window Breaker)
▼雙層巴士下層的廁所...能用就好!沒辦法有乾溼分離等五星級設備XD
The lower double-decker bus toilet...Can be used like!There is no way to wet and dry separation equipment such as five-star
▼"應景"的小廁所,可惜沒空間作洗手台XD
"Occasion" a small toilet, but no space for washbasin
▼廁所右上有透氣小窗
Toilets are breathable upper right scuttle
▼拍一下行李廂/廁所跟走道的空間
Slap luggage compartment / WC with aisle space
▼第一層的車尾引擎室再來特寫一下
The first layer of the rear engine compartment close-up look again
▼接著介紹上層客廂的部份...
Then introduced the upper part of the passenger compartment
▼空拍整個車內的配置
Shoot the entire interior space configuration
▼上層也都是很舒服的皮革座椅喔^^
Upper layer are also very comfortable leather seats
▼後樓梯上來的樣子
After the way up the stairs
▼前樓梯附近空間
Space near the front stairs
▼俯覽整個上層空間
View of the whole upper space
▼客廂內前後備有LED電視,正在撥樂高新聞^^
Front and rear passenger compartment with LED TV, you are dialing Lego News
▼人客來囉...
people off to
▼人偶立馬上座,生動活潑不少^^y
Dolls Immediately attendance, many lively
▼發車準備出去玩囉...!
Departure ready to go out to play
▼幸福快樂巴士!
Happiness bus
▼此部為低底盤巴士,所以一開始用四塊6X8底板作強化
This part is low-floor buses, so starting with a four 6X8 chassis for strengthening
▼接著拆解巴士作品比較複雜一點的車頭部份
Then the bus works a bit more complicated dismantling of the front part of the
▼內部用此零件來連接
Use this to connect the internal parts
▼整個車頭面板拆下
Remove the entire front panel
▼儀表板總成特寫
Close-up instrument panel assembly
▼儀表板有三個部份:方向盤/行車電表+手自排檔/置物箱
Instrument panel has three parts: the steering wheel / road meter + since row stalls / Footlocker
▼方向盤底下用這轉折零件構成
Underneath the steering wheel turning parts with which constitute
▼中間有二個部份
There are two middle part
▼置物箱上也有行車警示訊號
Footlocker also has road warning signals
▼把引擎室拆出來,我是做自己想要的型沒參考實際的巴士引擎結構了^^"
Ripped out of the engine room, I did not do what you want type refer to the actual structure of the bus engines
▼雙層大巴士動力核心:強大的日本柴油引擎
Double Big Bus Power Core: a powerful diesel engine in Japan
▼細部組件構成
Detail components
▼引擎上馬...
Engine Immediately
▼蓋上上蓋...
Close the lid
▼裝引擎散熱檔板...
Mounted engine cooling baffles
▼蓋回平板,尾端引擎室完成!
Cover back plate, tail engine room complete
▼再來拍上層比較細節的部份
Compare details shoot again the upper part of
▼LED電視架/客椅
LED TV rack / passenger seat
▼背後的樣子
Look Back
▼這台巴士上層,一開始要怎麼呈現最前方的車窗有點頭痛
This sets the upper deck, one begins to show how the forefront of the window a little headache
▼後來靈機一動,加上想要作出透明感,便此生出來了^^"
Later inspiration, plus you want to make sense of transparency, they came out of this life
▼搭上邊角小斜板下去,整個空隙不大,看著也算滿意XD
Catch small corner ramp down, the whole little gap, looking also considered satisfactory
▼車頂蓋前方有作警急逃生艙門
Car roof in front of a police emergency escape hatch for
▼後面是空調散熱板
Followed by air conditioning cooling plate
▼看著巴士的上層,來亂入一下當輕軌好了XD
Looking at the upper bus to chaos into what happens when a good light rail
▼有Fu...XD
feel great
▼上層的底部來拍張,其中配幾顆1X2,用來卡住底下車廂
The bottom to the top of the shots, which with a few 1X2, used car stuck underneath
▼最後準備來大合體...
Finally ready to Combination large
▼頂蓋上馬...
Cover Immediately
▼車廂合體...
Compartment Combination
▼車尾45度角
Rear 45 degree angle
▼車頭無敵空拍45度角^^"
Front invincible empty shot a 45 degree angle
▼最後選這張PS/落款完成【2013冬季賽】City 汽車創意賽/Double bus雙層巴士之作品!
Finally chose this PS/Inscribed completed【2013Winter season】City Car Creative Competition/Double decker bus
-----單拍車站-----
Single-shot Station
▼跟Double decker bus一同入鏡配場景的車站,來單拍介紹一下^^
Together with Double decker bus into the mirror with scenes of the station, to introduce a single shot
▼車站架構簡單,比較著重在屋簷的表現上
Station architecture is simple, relatively focused on the performance of the eaves
▼除了能防雨之外,前後都有作採光的透明板
In addition to rain, the front and back of the transparent plate for lighting
▼拍一下車站使用的轉折零件
Slap stations with turning parts
▼活動資訊看板/菸灰桶
Activities sidebar / ash barrels
▼候車椅
Waiting chair
▼車站背後的零件配置
Parts behind the station configuration
▼上蓋那些米黃2X4磚本來想作無顆粒化,底下轉折零件負擔太重所以作罷XD
2X4 beige brick superstructure those originally intended for non-granulated, turning parts underneath the burden is too heavy so give up
-----新增車體其它細節裝飾-----
Added bus other decorative details
▼今天把車體部份作最終修正,首先是車頭,修正後比較好看了^^"
Today, part of the body for final amendment, the first front, looks better after a correction
▼把之前厚重的後保桿也作修正,並加入角度作變化
The rear bumper before too thick for the correction and add perspective to make changes
▼保桿底下作了排氣管出來,往下噴放比較不會影響他人
Bumper bottom made out of the exhaust pipe, down spout less likely to affect others
▼內裝沒變,但整個車體外觀新加上彩繪塗裝(貼紙)
Interior has not changed, but the whole body together with the appearance of new paint painted degrees(Sticker)
▼尾端有個最大張的^^
There is a maximum number of photos of the end
▼車體右邊也有彩繪裝飾
The right side of the body is also painted decoration
▼多了貼紙貼上,整台車也活潑不少
More stickers affixed, the whole car is also a lot of lively
▼前後車門下端作了反光安全警示條
Lower front and rear doors made of reflective safety warning
▼當然車牌是一定要的,這LG-520的LG意指:LEGO,我愛樂高XD
Of course, the license plate is a must, this LG-520, LG means: LEGO, i love LEGO!
▼此推出雙層巴士最終化版本! 謝謝收看^^y
This release of the final version of the double-decker bus! Thank you for watching
