玩樂天堂 pockyland

標題: 2016星戰日樂高MOC比賽[B]- 共和國滅星者/Venator-Class Star Destroyer [打印本頁]

作者: ericlego321 時間: 2016-4-1 16:39
標題: 2016星戰日樂高MOC比賽[B]- 共和國滅星者/Venator-Class Star Destroyer
本帖最後由 ericlego321 於 2017-12-3 10:10 編輯

大家好,今年這個比賽我決定做了Venator-class共和國毀滅者,星戰裡我最喜歡的戰艦其實早在去我已經有用LDD式做過一次，但這次是2.0加強版
這是我第一次參加比賽,請各位神人多多指教
本人希望最後可以至少得到前五名(前五名獎品都好可口喔,不想當炮灰

)
我的venator,衝吧!

Hello everyone, I've decided to make a replica of the Venator-Class star destroyer, my favorite starship in StarWars, for this competition
actually I have already made one in the past, but this is the upgraded 2.0 version
This is the first time I've been in any sort of MOC competition, so any suggestions are welcomed.
I hope that I can get at least in the top 5 stop for this time(man the top 5 prizes look sweet, I don't wanna lose too badly

)
Lets go, my Venator!

----------------------------------------------------------------------------------------------------------------------------------------------------------
這是我在組的時候主要用的的參考圖片
This is the main image I used for reference while I was building

這是成品,在做的時候我想讓他的側邊有機械細節，所以比例上比較偏8039 ,但其實比例上的影響也沒多大（而且還多了一番喜感）:
This is the final product, while I was building I wanted it to have greebles on the side,so proportion wise it is a bit chunky like 8039, but the overall proportion thing is negligeable（and makes it overall a bit cuter）:

況且,機械細節所帶來的整體效果加的分數比減得多。

Since I mean, the effect of greebling just looks great, it is more of a plus than a minus.

前面的機械細節我用了手槍，一些radiator grill,鏟子等...

for the first section of the vessel's greeble I used a pistol, some radiator grill,and a shovel etc...

中半段主要是大門，但其實還是有其他的機械細節（請大家細細品嚐~）
the central section is mainly composed of the big gate, but many greeble are actually present too(waiting for you to discover them~)

俯瞰圖還蠻帥的（註：前方凸出來的那四根是用搖桿做的turbolaser砲）
the top view is pretty epic (the 4 thingy sticking ou in the front section are turbolasers made from joysticks)

巨大的感覺～

It feels so big~

我喜歡最後前方那方形小洞口，跟參考資料一樣
I'm actually quite delighted by the way the small hole on the front came out.

Venator 有兩個控制塔
The Venator has 2 control bridges...

...而保護他們的則是另外八個turbolaser(用prismatic binocular零件)
...protected by 8 more turbolasers(using this time prismatic binoculars)

底部是自己加了最多自己的東西的地方，因為這個部分其實還蠻枯燥的。黑色2x4平滑是停機區
小插曲：拍完後發現左側比右側少一條紅的

-->重拍（希望大家不要介意這種小細節）

The bottom part is actually where I put in the most of my stuff cuz the original version is pretty monotonous
the 2x4 black tile is the hangar bay
little problem I encountered:I found out that I forgot to put a red stripe on the left side

-->reshoot the photo(hope you guy won't care too much for such detail)

這就是我加的部分因為原載具這裡基本上市空蕩如也（greeble好養眼喔）
This greeble section is the part that I really improvised because the original model is pretty empty in this section(I love greebles)

後面這裡其實是花了我最多時間的地方，因為我沒做過噴射引擎,但最後總算用到有一個樣子了

the behind of the sip is actually the part that took me the most time , because I have never made any sort of engine exaust before, but here it is

你們可以看到翅膀邊緣的縫隙也有記得用三角旗遮起來
You can see that I have even covered the small gaps at the tip of the wing with some triangular flags

最下面的兩個噴射其實是用新型的槍做成的
The 2 lowest exausts are actually the new type of blaster

後面的view真迷人

nice booty(behind view)

這是腳架，有絕地聖殿的風格（和共和國的深紅）
前面那一小塊是頂住2x4平滑的停機區，後面ㄚ字型則是負責頂住翅膀
This is the stand, the style is inspired by the jedi temple(and the republic's red)
the little chunk in the front is supposed to hold the hangar bay represented by the 2x4 black tile
the Y shaped thing holds the wings of the vessel

這兩塊藍色的科技磚是另類的鎖，這樣戰艦就不會滑出來了
The 2 blue technic bricks act as locks, avoiding the ship to slide randomly

幕後花絮：
就如很多樂高官方的毀滅者，為了達成某些特定的角度，
這台戰艦也是由一個中心骨架和八片不同的板子組成的
Behind the scene:
Just like many official Star Destroyers, in order to achieve some specific angles,
this warship is built with a frame that holds 8 different triangular plates

Venator前半段的骨架是參考2010年出的8099 Midi-scale Imperial Star Destroyer
The frame of the Venator's front section is inspired by the 8099 Midi-scale Imperial Star Destroyer realeased in 2010

後半段則是互相顛倒的兩大塊用科技零件鎖在一起

The back section is made of 2 big chunks locked toghether using technic bricks

把它翻面，取出科技axel

flip it over, take out the technic axel

噹噹噹!解體了！

Tadaaa!Fully disassembled!

----------------------------------------------------------------------------------------------------------------------------------------------------------

我想在這謝謝Mel和賣我最後幾個挖也挖不到的零件的Andy,
讓我有機會完成機會我的第一個實體MOC（累死了

）
我未來還是主要會由LDD來進行創作，希望大家以後會繼續支持小弟！

I want to thank here Andy for selling me the last pieces I needed, and Mel (for being such an inspiration)
without them this MOC would never be possible.(this is so tiring

)
I will continue to make MOCs mainly using LDD in the future, I hope that you guys can continue to support me!

合照：
[已刪除,不給你看XD]

如果想看整個照片集這是我的Flickr
For the full album this is my Flickr

See you next time and wish me luck for the competition!

作者: 戴樂高買玩具 時間: 2016-4-1 22:02
很精美喔~如果背景後製一下黑色宇宙,或是放上黑色的紙拍攝是否質感上會更能加分呢?

作者: ericlego321 時間: 2016-4-2 18:51

戴樂高買玩具發表於 2016-4-1 22:02
很精美喔~如果背景後製一下黑色宇宙,或是放上黑色的紙拍攝是否質感上會更能加分呢? ...

謝謝大師的建議

作者: 戴樂高買玩具 時間: 2016-4-2 22:42

ericlego321 發表於 2016-4-2 18:51
謝謝大師的建議

不敢當~不敢當~

我不是大師,我們是同好,不用那麼客氣.

作者: GJxDREAM 時間: 2016-4-3 21:33
機械細節讓人看到著迷啊~

竟然連鏟子都能這樣使用~~
太棒了XDDD

作者: ericlego321 時間: 2016-4-3 22:16

GJxDREAM 發表於 2016-4-3 21:33
機械細節讓人看到著迷啊~

竟然連鏟子都能這樣使用~~

^^謝謝！

其實鏟子是看到剛好有兩個灰灰的零件才用的

作者: Angel後裔 時間: 2016-4-7 12:38
這臺真的很漂亮呢!

歡迎光臨玩樂天堂 pockyland (https://pockyland.tw/)